| | |
Mã hàng: PGXD24/PG58
Bảo hành: 12 tháng
| |
TƯ VẤN TẬN TÂM, NHIỆT TÌNH |
| |
SẢN PHẨM CHÍNH HÃNG Đa dạng chọn lựa |
| |
TRẢI NGHIỆM THỰC TẾ Tại cửa hàng |
| |
GIAO HÀNG MIỄN PHÍ Bán kính 10km |
| |
HỖ TRỢ SETUP MIỄN PHÍ Chuyên gia hàng đầu tại TCA |
The Shure PGX Digital Series Wireless Microphone System combines the convenience of single-touch remote channel setup with the reliability of 24-bit digital operation. Clean RF (Radio Frequency) performance, stable channel operation and low noise are all attributed to the PGX Digital's 24-bit / 48 kHz digital operation. The user-friendly yet rugged design of the Shure PGX system measures up to provide years of reliable use in halls, houses of worship, clubs, theaters, restaurants, bars, etc.
This PGXD24/PG58 Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the legendary PG58, a professional quality microphone ideal for lead and backup vocal performance applications.
The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap.
| Dimensions (HxWxD): | 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1") |
| Weight | 289g (10.2oz.) |
| Housing | ABS |
| Audio Output Level (ref. ±38kHz deviation, 1kHz tone) | XLR connector (into 3000Î load): -2.5dBV 1/4" connector (into 10000Î load): +10 dBV |
| Impedance: | XLR: 50Î 1/4": 50Î |
| Sensitivity | -102 dBm @ 10-5 BER |
| Image rejection | > 70dB, typical |
| Impedance balanced Pin 1 | Ground (cable shield) |
| Power Requirements | 12-18 Vdc at 150 mA, supplied by external power supply |
| Pin Assignments: | XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground |
| Pin 2 | Audio |
| Pin 3 | No Audio |
The PGXD2/PG58 Handheld Wireless Microphone Transmitter works with PGX-D Digital Wireless Systems.
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
| Audio input level | +2 dBV maximum at -10dB position -8 dBV maximum at 0dB position |
| Gain adjustment range | 10dB |
| RF Transmitter Output: | 30 mW maximum (dependent on applicable country regulations) |
| Dimensions | 254mm x 51mm dia. (10" x 2") |
| Weight | 290g (10.2oz.) without batteries |
| Housing | Molded PC/ABS handle and battery cup |
| Power Requirements | 2 AA size alkaline or rechargeable batteries |
| Battery Life | > 8 hours (alkaline) |
| Microphone Type | Dynamic (moving coil) |
| Polar Pattern | Cardioid (unidirectional) |
| Frequency response | 60 to 15,000Hz |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector |
| Output Impedance (at 1000Hz) | 300Î |
| Sensitivity (at 1000Hz) | -53dBV/Pa, (2.2 mV), 1 Pascal=94dB SPL |
| Electromagnetic Hum Sensitivity | 26dB equivalent SPL in a 1 millioersted field (60Hz) |
| Switch | Built-in On/Off switch |
| Connector | Three pin professional audio connector (male XLR type) |
| Case | Die cast metal handle, black matte finish; hardened silver colored, spherical steel mesh grille |
| Environmental Conditions | This microphone operates over a temperature range of -29 to 57 Celsius (-20 to 135 Fahrenheit), and at a relative humidity of 0 to 95%. |
| Weight | Net: 321g (11.3 oz) Packaged: 908g (2lb.) |