| | |
Mã hàng: EZG/12
Bảo hành: 12 tháng
| |
TƯ VẤN TẬN TÂM, NHIỆT TÌNH |
| |
SẢN PHẨM CHÍNH HÃNG Đa dạng chọn lựa |
| |
TRẢI NGHIỆM THỰC TẾ Tại cửa hàng |
| |
GIAO HÀNG MIỄN PHÍ Bán kính 10km |
| |
HỖ TRỢ SETUP MIỄN PHÍ Chuyên gia hàng đầu tại TCA |
The EZG/12 Easyflex miniature gooseneck condenser microphone is the perfect choice to capture speech and vocals in environments where quality, value and budget are primary considerations. The EZG/12 features a 12" flexible gooseneck section for ease in accurate positioning, an attached preamp with an XLR connector, and a cardioid polar pattern for reduced pickup of side noise.
The Shure Easyflex EZG can be mounted on podiums, pulpits, or conference tables and has a charcoal gray finish for an unobtrusive appearance. Includes a matching slip-on foam windscreen, and a locking flange mount. The EZG microphone is also available with an 18" gooseneck length for greater positioning range.
| Frequency Response | 50 to 17,000 Hz |
| Polar Pattern | Cardioid |
| Output Impedance (at 1 kHz) | Rated at 150 Ohms (170 Ohms actual) |
| Open Circuit Sensitivity (at 1 kHz, ref. 1 V/Pascal*) | -45.7 dB (20.0 mV) |
| Maximum Sound Pressure Level | (1 kHz at 1% THD, 1 kohm load): 129 dB |
| Equivalent Output Noise (A-weighted at 1kohm load) | 29 dB SPL |
| Signal to Noise Ratio (referenced to 94 dB SPL) | 29 dB |
| Dynamic Range (at 1 kohm Load) | 100.0 dB |
| Common Mode Rejection | 45 dB minimum |
| Preamplifier Output Clipping Level (1 kHz at 1% THD, 1 kohm load) | -12.0 dBV (0.25 V) |
| Polarity | Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector. |
| Power Requirements | 11 to 52 Vdc phantom, 2.0 mA |
| Relative Humidity | 0 to 95% |
| Dimensions (length x Diameter) | 12" x .46" (305 x 11.68 mm) |