| |
Mã hàng: ULXD24/B58
Bảo hành: 12 tháng
TƯ VẤN TẬN TÂM, NHIỆT TÌNH | |
SẢN PHẨM CHÍNH HÃNG Đa dạng chọn lựa |
|
TRẢI NGHIỆM THỰC TẾ Tại cửa hàng |
|
GIAO HÀNG MIỄN PHÍ Bán kính 10km |
|
HỖ TRỢ SETUP MIỄN PHÍ Chuyên gia hàng đầu tại TCA |
- 02 Bộ phát ULX2/beta58
- Bộ thu kỹ thuật số ULXD4
The Shure ULXD4 is a half-rack wireless receiver for use with ULX-D Digital Wireless Systems. The ULXD4 offers extremely efficient RF performance, enabling a dramatic increase in the number of simultaneous active transmitters on one TV channel. Transparent 24-bit digital audio quality with incredibly accurate low end and transient response delivers the purest reproduction of source material ever available in a wireless system.
Intelligent scanning and one touch sync makes choosing the best frequencies and linking to transmitters incredibly fast and efficient. For applications where privacy is a requirement, AES 256-bit encryption provides government-sanctioned security. Ethernet networking allows Wireless Workbench software integration and enables computer control of receiver settings.
Generations ahead of any other available system in its class, ULX-D brings a new level of performance to professional sound reinforcement.M/p
Dimensions | 197 mm x 171 mm x 42 mm (7.75 in. x 6.75 in. x 1.65 in.), H x W x D | |
Weight | 913 g (2.0 lbs), without antennas | |
Housing | Galvanized Steel | |
Spurious Rejection | >80 dB, typical | |
Connector Type | BNC | |
Impedance | 50 Ω | |
Bias Voltage | 12 - 13 V DC, 170 mA maximum, per antenna | |
Gain Adjustment Range | -18 to +42 dB in 1 dB steps (plus Mute setting) | |
Configuration | 1/4” (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -) |
|
Impedance | 1/4” (6.35 mm): 100 Ω (50 Ω Unbalanced) XLR: 100 Ω |
|
Full Scale Output | 1/4” (6.35 mm): +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV |
|
Mic/Line Switch | 30 dB pad | |
Phantom Power Protection | 1/4” (6.35 mm): Yes XLR: Yes |
|
Power Over Ethernet (PoE) | No, protected | |
Network Interface | Single Port Ethernet 10/100 Mbps | |
Network Addressing Capability | DHCP or Manual IP address | |
Maximum Ethernet Cable Length | 100 m (328 ft) |
With an interchangeable BETA 58A® microphone cartridge, the ULXD2/B58 delivers uncompromising audio quality and RF performance, and AES 256-bit encryption for secure transmission.
The ULXD2/B58 Handheld Wireless Microphone Transmitter works with ULX-D Wireless Systems.
Gain Offset Range | 0 to 21 dB (in 3 dB steps) | |
Battery Type | Shure SB900A Rechargeable Li-Ion or LR6 AA batteries 1.5 V | |
Battery Runtime | Shure SB900A: >11 hours Alkaline: 11 hours |
|
Dimensions | 256 mm × 51 mm (10.1 in. × 2.0 in.) L × Dia. V50, V51 Bands: 278 mm × 51 mm (10.9 in. × 2.0 in.) L × Dia |
|
Weight | 340 g (12.0 oz.), without batteries V50, V51 Bands: 348 g (12.3 oz.), without batteries |
|
Housing | Machined aluminum | |
Configuration | Unbalanced | |
Maximum Input Level | 145 dB SPL (SM58), typical | |
Preamplifier Equivalent Input Noise (EIN) | 120 dBV, A-weighted, typical | |
Antenna Type | Integrated Single Band Helical | |
Occupied Bandwidth | <200 kHz | |
Modulation Type | Shure Proprietary Digital | |
Power | 1 mW, 10 mW, 20 mW |
Type | Dynamic (moving coil) |
Output Level (at 1,000 Hz) | Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL |
Impedance | Rated impedance is 150 Ω(290 Ωactual) for connection to micro-phone inputs rated low Z |
Case | Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille |
Adjustable, Stand Adapter | Slip-in microphone mounting, unbreakable, adjustable through 180° with standard 5/8"-27 thread, black finish |
Net Weight | 278 grams (9.92 oz) |
Frequency Response:
Polar Pattern:
Dimensions:
Phasing: