| |
Mã hàng: ULXD14/30
Bảo hành: 12 tháng
TƯ VẤN TẬN TÂM, NHIỆT TÌNH | |
SẢN PHẨM CHÍNH HÃNG Đa dạng chọn lựa |
|
TRẢI NGHIỆM THỰC TẾ Tại cửa hàng |
|
GIAO HÀNG MIỄN PHÍ Bán kính 10km |
|
HỖ TRỢ SETUP MIỄN PHÍ Chuyên gia hàng đầu tại TCA |
- ULXD1 BodyPack Wireless Transmitter
- ULXD4 Digital Wireless Receiver
- WH30 Wireless Headset Microphone
The Shure ULXD4 is a half-rack wireless receiver for use with ULX-D Digital Wireless Systems. The ULXD4 offers extremely efficient RF performance, enabling a dramatic increase in the number of simultaneous active transmitters on one TV channel. Transparent 24-bit digital audio quality with incredibly accurate low end and transient response delivers the purest reproduction of source material ever available in a wireless system.
Intelligent scanning and one touch sync makes choosing the best frequencies and linking to transmitters incredibly fast and efficient. For applications where privacy is a requirement, AES 256-bit encryption provides government-sanctioned security. Ethernet networking allows Wireless Workbench software integration and enables computer control of receiver settings.
Generations ahead of any other available system in its class, ULX-D brings a new level of performance to professional sound reinforcement.M/p
Dimensions | 197 mm x 171 mm x 42 mm (7.75 in. x 6.75 in. x 1.65 in.), H x W x D | |
Weight | 913 g (2.0 lbs), without antennas | |
Housing | Galvanized Steel | |
Spurious Rejection | >80 dB, typical | |
Connector Type | BNC | |
Impedance | 50 Ω | |
Bias Voltage | 12 - 13 V DC, 170 mA maximum, per antenna | |
Gain Adjustment Range | -18 to +42 dB in 1 dB steps (plus Mute setting) | |
Configuration | 1/4” (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -) |
|
Impedance | 1/4” (6.35 mm): 100 Ω (50 Ω Unbalanced) XLR: 100 Ω |
|
Full Scale Output | 1/4” (6.35 mm): +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV |
|
Mic/Line Switch | 30 dB pad | |
Phantom Power Protection | 1/4” (6.35 mm): Yes XLR: Yes |
|
Power Over Ethernet (PoE) | No, protected | |
Network Interface | Single Port Ethernet 10/100 Mbps | |
Network Addressing Capability | DHCP or Manual IP address | |
Maximum Ethernet Cable Length | 100 m (328 ft) |
The ULXD1 is a wireless bodypack transmitter compatible with ULX-D™ Digital Wireless Systems. With a rugged yet lightweight aluminum body, the ULXD1 delivers transparent audio quality and rock-solid RF transmission in a compact, easy-to-conceal design. Intuitive controls and menu screens combined with a high-contrast LCD make adjustments fast and easy, and IR sync rapidly relays setting changes to the receiver. Two AA batteries provide up to 11 hours of performance time, and advanced rechargeability options extend battery life and metering precision. Combined with a wide selection of legendary Shure microphones, the ULXD1 delivers professional wireless audio tailored for installed sound and rental applications.
Gain Offset Range | 0 to 21 dB (in 3 dB steps) |
Battery Type | Shure SB900: >12 hours Alkaline: 11 hours |
Dimensions | 86 mm x 66 mm x 23 mm (3.4 in. x 2.6 in. x 0.9 in.) H x W x D |
Weight | 142 g (5.0 oz.), without batteries |
Housing | Cast aluminum |
Connector | 4-Pin male mini connector (TA4M), See drawing for details |
Configuration | Unbalanced |
Impedance | 1 MΩ |
Maximum Input Level 1 kHz at 1% THD |
Pad Off: 8.5 dBV (7.5 Vpp) Pad On: 20.5 dBV (30 Vpp) |
Preamplifier Equivalent Input Noise (EIN) System Gain Setting ≥ +20 |
120 dBV, A-weighted, typical |
Connector | SMA |
Antenna Type | 1/4 wave |
Impedance | 50 Ω |
Occupied Bandwidth | <200 kHz |
Modulation Type | Shure Proprietary Digital |
Power | 1 mW, 10 mW, 20 mW br/> See Frequency Range and Ouput Power table, varies by region |
The Shure Model WH30 is a light yet rugged headset microphone. Designed for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality electret-condenser cartridge suitable for all applications where mobility, comfort, low microphone-visibility, and high sound quality are required. Because of its cardioid (unidirectional) pickup pattern, the WH30 provides isolation from extraneous sound sources and high gain-before-feedback.
The wireframe and gooseneck adjust to any head size and shape. An integrated elastic headband comfortably pads and secures the headset. The WH30 is supplied with two snap-on windscreens, clothing clip, storage bag and cable-management device.