Phần mềm tương thích
|
Cisco TelePresence Software Version TC 5.1 or later
Cisco Collaboration Endpoint Software Version 8.0 or later (requires Touch 10 or TRC6 remote control)
|
Băng thông
|
- H.323 and SIP up to 6 Mbps
|
Băng thông đáp ứng/ chất lượng hình ảnh
|
- 720p30 from 768 kbps
- 720p60 from 1152 kbps
- 1080p30 from 1472 kbps
- 1080p60 from 2560 kbps
|
Mã hóa Video
|
|
Đầu vào Video
|
- One HDMI and One DVI-I (Analog and Digital); supports formats up to maximum 1920x1080 @ 60 fps (HD1080p60)
- Extended Display Identification Data (EDID)
|
Đầu ra Video
|
Two HDMI Outputs Supported Formats:
- 1920 x 1080@60 fps (1080p60)
- 1920 x 1080@50 fps (1080p50)
- 1280 x 720@60 fps (720p60)
- 1280 x 720@50 fps (720p50)
- 1366 x 768@60 fps (WXGA)
- 1360 x 768@60 fps(WXGA)
- 1280 x 768@60 fps (WXGA)
- 1280 x 1024@60 fps
- 1024 x 768@60 fps
|
Các chuẩn âm thanh
|
- G.711, G.722, G.722.1, G.728, G.729, AAC-LD and OPUS
|
Đầu vào âm thanh
|
- Two microphones, 4-pin minijack
- One minijack for line-in (stereo)
- One audio in from camera (HDMI)
|
Đầu ra âm thanh
|
- One minijack for line out (stereo)
- One HDMI, (digital main audio)
|
Tính năng luồng kép
|
- H.239 (H.323) dual stream
- BFCP (SIP) dual stream
- Support resolutions up to 1080p) at 30 frames per second
|
Tính năng đa điểm (Yêu cầu nâng cấp)
|
- Adaptive SIP/H.323 MultiSite; resolution up to 720p30
◦ 3-way resolution up to 720p30
◦ 4-way resolution up to 576p30
- Full individual audio and video transcoding
- Individual layouts in MultiSite continuous presence
- H.323/SIP/VoIP in the same conference
- Support for Presentation (H.239/BFCP) from any participant at resolutions up to 1080p15
- Best Impression (automatic continuous presence layouts)
- H.264, encryption and dual stream from any site
- IP downspeeding
- Participants can be added by dialing in or host can dial out
- Conference rates up to 6 Mbps
|
Giao thức kết nối
|
- H.323
- SIP
- ISDN (requires Cisco ISDN Link)
|
Cổng mạng
|
- One LAN and Ethernet (RJ-45) 10/100/1000 Mbit
|
Các cổng khác
|
- Two USB ports can be used for serial control
|
Nguồn điện
|
- Auto-sensing power supply
- 100 - 240 VAC, 50/60 Hz
- Maximum 40 watts for codec and main camera
|