|
Mã hàng: KMS44/SL
Bảo hành: 12 tháng
TƯ VẤN TẬN TÂM, NHIỆT TÌNH | |
SẢN PHẨM CHÍNH HÃNG Đa dạng chọn lựa |
|
TRẢI NGHIỆM THỰC TẾ Tại cửa hàng |
|
GIAO HÀNG MIỄN PHÍ Bán kính 10km |
|
HỖ TRỢ SETUP MIỄN PHÍ Chuyên gia hàng đầu tại TCA |
The KSM44/SL is a multiple pattern (cardioid, omnidirectional, bidirectional), externally biased, dual large diaphragm condenser microphone with extremely low self-noise (7dB). Developed to meet the needs of studio recording musicians, the warm, rich sound of the KSM44 delivers exceptional performance, tailored to deliver vivid reproduction of voice for the most critical recordings. The KSM44 also offers great flexibility in a variety of recording applications, working well on acoustic and amplified instruments, as its capacity for managing high SPLs accommodates loud sound sources such as drums and guitar amplifiers.
Transducer | Externally Biased Condenser |
Polar Pattern | Switchable, Cardiod, Omnidirectional and Figure-8 |
Frequency Response | 20 Hz to 20 kHz |
Dynamic Range (Typical) | Cardioid: 120 dB With Attenuator On - 125 dB Omnidirectional: 122 dB With Attenuator On - 128 dB Figure-8: 121 dB With Attenuator On - 127 dB |
Signal to Noise Ratio | Cardioid: 87 dB Omnidirectional: 84 dB Figure-8: 84 dB |
Maximum Input Sound Level | Cardioid: 127 dB With Attenuator On - 132 dB Omnidirectional: 132 dB With Attenuator On - 138 dB Figure-8: 131 dB With Attenuator On - 137 dB |
Power Requirements | 48 Vdc = 4 Vdc (IEC-268-15/DIN 45 596), Positive Pins 2 and 3 |
Output Impedance | 150 ohms (actual) |
Output Connectors | 3-pin XLR |
Pad | N Yes, Switchable 15 dB Attenuator |
Low Frequency Roll-Off | Yes, 3 Position Switch: Off - Incoming Signal Remains Unaltered Low Frequency Cutoff - Provides an 18 dB-per-Octave Cutoff @ 80 Hz. Low Frequency Rolloff - Provides a 6dB-Per-Octave Rolloff Filter at 115Hz Note: Built In Subsonic Filter Eliminates Rumble from Mechanical Vibration Below 17 Hz |
Dimensions | 7.37 x 2.20" / 187 x 55.9mm LxW |
Weight | n 17.3 oz. (490.5 g) |